DIY Alignment: How to Do a Wheel Alignment at Home

How to Do a Wheel Alignment Yourself with String

Looking to do your own wheel alignment? This article reviews the basics of DIY alignment and two methods for checking the wheel alignment—one with string and another with a tape measure. Read on to find out how to do a wheel alignment at home by yourself.

Do a DIY wheel alignment yourself with quality auto parts and tools at 1aauto.com

Signs Your Car or Truck Needs a Wheel Alignment

Tire with worn outside tread
  • If the outside tread of any tires is worn down to where its almost bald, the alignment is off
  • The steering wheel, when centered, is crooked.
  • The vehicle pulls to the side of the road when driving straight
Crooked steering wheel

Steps for a DIY Alignment with String

Pro Tip: After the DIY wheel alignment is complete, we recommend bringing the car to a shop for professional alignment.

1. Read the PSI of Each Tire

Take a reading of the psi of each tire and confirm the reading is accurate.

2. Place Cardboard Underneath the Tires

Stack two pieces of cardboard and place them behind the worn tire and the opposing tire on the opposite side.

Back the car up so the tire is centered on the cardboard.

3. Center the Steering Wheel

Turn the steering wheel back and forth and adjust it as close as possible to the center so it’s centered

4. Tighten String to Two-Step Stools Within Reaching Distance of the Tires

Placing a stool with string within reaching distance of the tire

Wrap a piece of string between two step stools and place them within reaching distance of the tires.

5. Make Sure the String Reaches the Center of the Tire and Is one Inch from the Center Cap

Measuring the height of the string to the center of the tire

Measure the height of the string and make sure it reaches the center height of the tire. Do this for both sides.

Measuring the length of the string from the center cap

Place the string about an inch from the center cap and make sure it’s tight and not touching a part of the car.

6. Measure the Distance Between the Step Stools and Make Sure They Match

DIY wheel alignment - Measuring the distance between two stools with measuring tape

Before making an adjustment, measure the distance between two strings at the front and rear and adjust them so the measurements match.

7. Check for a 1/16″ Difference from the Back and Front of the Rim with a Tape Measure

DIY wheel alignment - Measuring the back of the rim to the string

Measure the back of the rim to the string.

DIY wheel alignment - Measuring the front of the rim to the string

Measure the front of the rim to the string.

You want the front of the tire going in about 1/16th from the rear of the tire. On this vehicle, if the tire is out too far, you want to adjust and loosen the backside tie rod to push the front of the tire out. Different vehicles will have different ways to make adjustments.

8. Turn the Wheel and Adjust the Tie Rod Nut and Tie Rod a Quarter Turn for your DIY alignment

Marking a tie rod

To adjust the right front wheel, turn the steering wheel all the way to the left. On this vehicle, mark the position of the front tie rod end.

Loosening a tie rod nut

Loosen the nut for a new turns

Tightening a tie rod with pliers

Turn and tighten the tie rod a quarter turn with pliers. Then tighten the nut.

9. Center the Steering Wheel, Measure the Distance from the Front and Rear of the Rim, and Adjust the Tie Rod if Needed

Turn the steering wheel to the center position to straighten out the tire.

Measure the position of the wheel and adjust the tie rod again—maybe a full turn if necessary.

How to Check the DIY Alignment with a Tape Measure

DIY wheel alignment - checking the distance between two wheels with a tape measure

For another method to check the front alignment, use a tap measure.

How to Check the Alignment with a Tape Measure

  1. Pick a Line on the Back of the Tire Near the Center and Have an Assistant Hold the Tape Measure There

    Pick a line on the tire and have a partner on the other side pick a line on the tire near the center. Have the partner hold the tape measure and measure the distance between the two tires.

  2. Measure the Distance Between the Back of the Tires

    Mark the measurement on the tire with a marker and measure the distance between them.

  3. Measure the Distance Between the Front of the Tires

    Do the same for the front of the tire. Record the distance between the back and the front, which should be about 1/16th

Content Related to DIY Wheel Alignment

Shop Parts at 1aauto.com for DIY Alignment

Summary
DIY Alignment: How to Do a Wheel Alignment Yourself
Article Name
DIY Alignment: How to Do a Wheel Alignment Yourself
Description
Looking to do your own wheel alignment? This article reviews the basics of DIY alignment and two methods for checking the wheel alignment—one with string and another with a tape measure. Read on to find out how to do a wheel alignment at home by yourself.
Author
Publisher Name
1A auto
Publisher Logo

Leave a Reply

Your email address will not be published. Required fields are marked *