How to Clean Battery Terminals

Corrosion on your car or truck’s battery terminals will cause resistance/restriction in between the battery and the battery cables that lead to important parts of the vehicle like the power control module (PCM), fuse box, or starter, and this can cause problems when trying to start. Your vehicle might not start at all, it might start slowly, or electronics like the headlights might malfunction. This post covers how to clean the battery terminals and other battery parts of corrosion with baking soda and battery terminal cleaner, what to put on the terminals to prevent corrosion, why batteries corrode, and more.

Fix and clean battery terminals yourself with quality auto parts at 1aauto.com

How to Clean Battery Corrosion

How to Clean Car Battery Corrosion

Pro Tip: Wear hand and eye protection. You want these on anytime you are working on a vehicle but especially around a battery.

If the gloves touch any corrosion, change them before touching yourself such as your face or eyes, or food or clothes.

Why Car Batteries Corrode

Sulfuric acid inside the battery cells produces a hydrogen gas that needs to vent out of the battery. This can collect on the battery and the battery terminals after mixing with the air and dirt and debris around the battery.

How to Check the Battery Terminals for Corrosion

Battery Terminal with Corrosion
Blue Corrosion on a car battery terminal and terminal connector

Make sure there is no corrosion on the metal parts of the battery cable or the battery terminal connector. Corrosion will look like a blue, green, or white color mixture. The battery terminals should have metal-on-metal contact and be free of debris.

Why Is There Dirt and Debris on the Battery?

Debris collected on a car battery
Debris collected on a car battery

The debris on the battery is a mixture of dirt, dust, etc. and hydrogen gases lifting from the sulfuric acid, so you do not want this on your skin.

Signs the Battery Is Undercharging

Check the battery for corrosion. If there is corrosion on the negative battery terminal, the battery has been undercharging.

Undercharging can happen from driving for short periods of time with a lot of electronics on such as the wiper blades, the radio, etc. If draws from the battery are too large, the alternator will not have enough time to charge the battery, and corrosion will start to build on the negative battery terminal.

Signs the Battery Is Overcharging

If there is corrosion on the positive battery terminal, the battery has been overcharging.

Overcharging can happen from driving for long periods of time, like during a long distance travel, where the alternator is overworked trying to charge the battery. If the alternator has a bad voltage regulator, it will keep charging the battery, and corrosion will start to build on the positive battery terminal.

Check the Battery Cables for Corrosion

Any colors or blue, green, or red inside the battery cable means more than likely the cable is no good. A little corrosion can be cleaned off, but if there is excessive corrosion, the battery cable needs to be replaced—especially if it is on a newer vehicle.

Battery cable wire connected to a starter
Common area to see corrosion on a battery cable wire connected to a starter

Check where the cables connect. For example, if the battery cable is connected to the starter, there may be corrosion where the cable bolts on and the wiring, which tends to turn green when corroded. This creates resistance, and over time the wiring will fray and break.

Disconnected Battery Cable from a Universal Battery Terminal
Disconnected battery cable from a universal battery terminal connector

We recommend replacing the entire battery cable. While common on older vehicles, if the bolts on the universal terminal connector are not tight enough, the cable can wiggle around or out of the terminal and cause an intermittent connection. Moisture can also travel inside the wiring and create resistance.

Test the Battery Debris with a Multimeter

Testing dirt and debris collection on a battery surface

With a multimeter, place one lead to one cap and the other lead to the other cap. Take a reading. If the voltage jumps up to, for example 4.4 volts, which is a lot, the collection of hydrogen gas, debris, and dirt is holding current, which will be grinding out and putting a consistent draw on the battery.

If the battery has that collection of dirt and debris and the battery charge keeps decreasing, it’s likely not an internal issue with the battery but more of a vaporization problem on the battery from overheating or overcharging. The current will make its way into the air, decreasing the life of the battery over time.

The Best Way to Clean the Battery Terminals and the Battery

We recommend removing the battery from the vehicle to clean it. A more controlled environment can keep cleaning solution from entering the vent caps. If cleaning solution enters the vents, it could neutralize the fluid or sulfuric acid in the battery. If one of the battery cells are neutralized, the battery will be damaged beyond repair, even if it’s new.

How to Remove the Battery

How to Remove the Battery

  1. Disconnect the Negative Battery Terminal

    Remove the negative battery terminal first

  2. Disconnect the Positive Battery Terminal

    Remove the positive battery terminal after the negative battery terminal has been disconnected

  3. Remove the Battery Mount

    Loosen and remove the bolts from the battery mount. Lift the battery bracket up from the battery.

  4. Remove the Battery

    Lift the battery up and out

If you have access to one, a battery memory savor will help save set radio stations and make sure the parameters in the vehicle’s computer aren’t deleted to prevent resetting the readiness monitors. It will also act as a surge protector for the vehicle’s electrical system in case you remove the negative battery terminal and it drops and bounces on the battery terminal a few times, there will be no concern about blowing fuses and/or the brain of the vehicle.

How to Remove Battery Corrosion

Battery placed in a bucket
1. Place the Battery Into a Catch Bucket

Place the battery into a catch bucket. This will catch any excessive cleaning fluid. Some clean the battery with hot water and baking soda, but that might travel into the battery cells under the cars and contaminate them, neutralizing and destroying the battery.

2. Clean Dirt and Debris from the Battery Surface with a Brush or Plastic Scraper
Plastic scraper to remove corrosion from the battery
Plastic scraper to remove corrosion from the battery

We recommend cleaning the surface with a brush or plastic scraper that’s not so long it may contact both battery terminals/posts at the same time. Remove any corrosion from the battery surface.

Optional: Clean Dirt and Debris from Under the Vent Caps
Dirt outlining the vent caps

Battery cells sit underneath the caps. If removing the caps to clean any outlining corrosion, do not get any debris inside the cells, and do not touch the sulfuric acid inside or have flammable objects near it. Not having a good seal between the cells and the cover can cause future problems with battery health.

3. Clean the Battery Terminal Connectors with Baking Soda or Battery Terminal Cleaner

Battery terminal cleaner will have an additive that changes the color of the corrosion to identify it for removal.

A common way to clean the battery terminals is with hot water and baking soda.

Steps for cleaning a car battery with hot water and baking soda

Cleaning the battery terminal with a cloth, baking soda, and hot water
  1. Add baking soda to a small plastic cup full of hot water
  2. Make sure the vent caps on the battery are tightly secure
  3. Dip a cloth into the solution
  4. Clean off corrosion into the catch pan with the wet cloth
  5. Try to avoid letting water flow near the vent caps
  6. Clean the top with a cloth to dry it

Note: Excessive baking soda can also mix with corrosion on the battery, fall to the ground and contaminate the environment.

Steps for cleaning a car battery terminal connector with hot water and baking soda

Cleaning a Removeable Terminal Connector

Placing a dirty battery terminal connector in baking soda and hot water solution
Placing a dirty battery terminal connector in baking soda and hot water solution
  1. If you can remove a terminal contact/connector end, mix hot water and baking soda in a cup
  2. Place the cup in a catch pan
  3. Dip the terminal end in and let it clean in the solution for some time

Cleaning a Non-Removable Terminal Connector

Placing a dirty battery terminal connector in baking soda and hot water solution
  1. If the terminal end has corrosion but cannot be removed, mix hot water and baking soda in a cup
  2. Place the cup in a catch pan or collection rag
  3. Dip the terminal end in the solution to clean it

Check the Terminal Connectors Condition

Terminal connector in OK condition
Terminal connector in OK condition

After the terminal connector is cleaned, check its condition. If the terminal feels like it is falling apart because of thin metal, it needs to be replaced. Clean the inner portion and the contact points and reinstall the terminal if it’s in good condition.

Clean the Inner Portion of the Terminal Connector

Cleaning the inner portion of the battery terminal connector with a metal brush
Cleaning the inner portion of the battery terminal connector with a metal brush

Clean the inner portion of the terminal that connects to the battery post with a metal brush.

Exposed wiring near the crimped section of the battery terminal connector

Pay attention to the wired area that will be crimped down by the terminal end. If there is blue or green inside the terminal or after wiggling it, any wiring that is corroded or falling apart, or is weak and fraying, the entire harness in most cases needs to be replaced.

4. Clean the Battery Terminals with a Wire Brush
Battery terminal brush and a coated battery terminal
Battery terminal brush and a coated battery terminal

Clean the terminals/battery posts even if they do not appear to have corrosion. The terminal can have a coating that can affect the connection.

Cleaned battery terminal
Cleaner battery terminal

Place a terminal end brush/cleaner on the terminal end, twist it, and clean the corrosion off the battery terminals until all the parts are clean.

5. Clean the Battery Cables
Cleaning a battery cable from corrosion with sand paper

Clean the battery cable of corrosion with a sanding disk to remove the corrosion. If the tool is air -based, the corrosion could blow around in the air. If breathed in, it will cause respiratory problems. Cleaning the cable/terminal connectors with sand paper may take longer but it is effective.

6. Clean the Battery Hold Down
Cleaning a battery hold down bracket with corrosion spray

Clean the battery hold down with corrosion spray or baking soda and water and remove any corrosion.

7. Remove Corrosion from the Brushes

Rinse the brushes of any corrosion to prevent rust from accumulating and damaging the brush.

How to Prevent Battery Terminal Corrosion

Applying ignition and battery sealer to the battery terminals to prevent corrosion
Applying ignition and battery sealer to the battery terminals

Optional: After the battery is reinstalled, put on silicone paste labeled with dielectric grease (it has to say dielectric grease) or ignition and battery sealer to the battery terminals for added protection to any area that corrosion can build on.

Related Content

Shop Parts and Tools at 1A Auto

Summary
How to Clean Battery Terminals | Steps to Remove Battery Corrosion
Article Name
How to Clean Battery Terminals | Steps to Remove Battery Corrosion
Description
If your car or truck has battery corrosion, this post reviews how to clean battery terminals from corrosion with baking soda and other methods, how to prevent corrosion, and more
Author
Publisher Name
1A Auto
Publisher Logo

One thought to “How to Clean Battery Terminals”

  1. Thank for your article. I have trouble starting my car or other issues with its performance and noticed a flaky white or blue-ish substance on my car battery? Your article helps me a lot.

Leave a Reply

Your email address will not be published. Required fields are marked *