How to Fix a Broken Wire

Sometimes fluids like oil can dry and break the protective sheath on wires over time. Wires can also melt and get damaged in other ways that leave them exposed and require them to be replaced before they cause problems with the part they are connected to. This post explains how to fix a broken wire that needs to be cut and replaced in a car by using a wire stripper and crimper tool, new wire, butt splices, heat shrinks, a lighter, electrical tape, and a wire loom.

Fix a broken electrical wire on your car with quality auto parts at 1aauto.com

How to Replace Chewed, Broken, Melted, Exposed, or Damaged Electrical Wires

Why Does My Car Have Broken Electrical Wires?

Exposed copper wire with broken protective sheath

Sometimes the protective sheath on a wire can dry out and break off. Wires can also melt and tear for different reasons, like an animal that chewed through it. Once the copper wire is exposed, the wire will need to be replaced or it will cause functionality issues with the affected part.

For example, oil can leak onto wires and tape and dry them out over time, eventually causing cracking, brittleness, and breaking.

How to Replace a Broken Electrical Wire in 17 Steps

Items Needed

  1. Wire stripper and crimper tool
  2. New electrical wire
  3. Butt splices
  4. Heat shrinks
  5. Lighter
  6. Electrical tape
  7. Wire loom

Steps for How to Fix a Broken Wire

  1. Find New Wiring of the Same Gauge

    Find wires of the same gauge as the faulty wire

  2. Pick a Section on the Damaged Wire to Cut

    Trace the broken wires down to where they are flexible and not cracked or broken to find a good section to sever

  3. Strip the Ends of the New Wire

    Take a piece of cut wire and strip the ends with a wire cutter to expose the copper wire

  4. Twist the Copper Wire

    Twist the copper wire that is exposed

  5. Remove the Damaged Wire with Wire Cutters

    Cut the section of the brittle, dry, melted, chewed, torn, or exposed wire off from the existing wire with wire cutters

  6. Strip the Ends of the Existing Wire

    Strip the ends of the existing wire to expose the copper wire

  7. Twist a Butt Splice onto the Existing Wire

    Twist a butt connector onto the existing wire as far as possible

  8. Crimp the Butt Connector to the Existing Wire

    Crimp the center of the butt connector with wire stripper/crimper tool to secure the butt connector. Try to crimp the butt connector at the end of the wire sheath, right before the exposed copper wire.

  9. Test How Tight the Butt Connector Is

    Tug the wire to confirm the butt connector is on tight

  10. Crimp the Replacement Wire to the Butt Connector

    Repeat the steps above to connect the wires together by attaching the replacement wire to the butt splice

  11. Place a Heat Shrink Over the Repaired Wire

    Place a heat shrink over the section of the repaired wire

  12. Melt the Heat Shrink

    Melt the shrink with a lighter like a mini torch

  13. Place a Heat Shrink on the Other End of the Replacement Wire

    For the outer end of the new replaceable wire, place the heat shrink on first before attaching the butt splice.

  14. Strip, Crimp, and Melt a Heat Shrink to the Ends of the Remaining Wires

    Repeat the steps above to attach the other end of the replacement wire and to splice any new wires together

  15. Wrap the Wires with Electrical Tape

    Once finished, wrap the wires with electrical tape

  16. Install a Wire Loom

    Place a wire loom over the wires

  17. Tape the Wire Loom

    Place tape over the wire loom

.

Related Content

Shop Auto Parts at 1aauto.com

Summary
How to Splice, Connect, or Fix a Broken Electrical Wire
Article Name
How to Splice, Connect, or Fix a Broken Electrical Wire
Description
Find out how to splice, connect, or fix a broken wire in your car or truck with a few electrical tools like wire cutters and butt splicers and these steps from our mechanics
Author
Publisher Name
1A Auto
Publisher Logo

Leave a Reply

Your email address will not be published. Required fields are marked *