How to Perform a Radiator Pressure Test

Radiator Pressure Test

If you want to find a coolant leak or test the pressure of the cooling system after a coolant flush, you can perform a radiator pressure test, also known as a coolant pressure test. The test requires connecting the pressure tester to the coolant reservoir or the radiator and pumping the tester to pressurize the system, which can help find coolant leaks. These steps explain how to use a coolant pressure tester and perform a coolant or radiator pressure test.

Save on Quality Auto Parts with Free Shipping

If a coolant or radiator pressure test shows a part is leaking and broken, replace it with quality auto parts at 1aauto.com

How to Pressure Test the Cooling System

How to Perform a Coolant Pressure Test

Before beginning, make sure the engine and the system is cool since hot coolant can burn, and that the cooling system has no pressure. Follow these steps for how to use a radiator pressure tester

Steps for a Coolant or Radiator Pressure Test

  1. Add Water If the Coolant Level Is Low

    If the coolant level is low, add water or coolant to raise it. If you plan on removing and fixing a part, add water to not waste coolant since the system will be drained and refilled

  2. Remove the Radiator Cap

    If applying the tester to the radiator, remove the radiator cap once the system is cool and depressurized.

  3. Connect an Adapter if Necessary

    If you need an adapter and your coolant pressure tester kit has one, connect it to the radiator or the coolant reservoir.

  4. Tighten the Coolant Pressure Tester

    Tighten the coolant pressure tester to the adapter or the radiator or coolant reservoir. Push down and twist the connector clockwise until you feel it click and it locks in place

  5. Check the Radiator Cap for the System’s psi

    Check the radiator cap to see how much pressure to apply without going over this number

  6. Apply Pressure to the System without Exceeding the System’s psi by Pumping the Tester

    Keep pumping the pressure tester to apply pressure to the cooling system without going over the system’s psi number on the radiator cap, which the pressure tester’s gauge measures. Most cooling systems’ pressure measures between 13 and 16 psi.

  7. Check the System for Leaks

    If the pressure gauge drops quickly, there is a leak. The slower the gauge drops, the smaller the leak. If the system holds pressure at the set pressure on the gauge, check the gauge over a span of 30 minutes and see if the pressure has dropped. If the level drops significantly, there is a leak.

    Inspect parts like the radiator, upper and lower radiator hoses and hose clamps, water pump, thermostat, heater core hoses/firewall, head gaskets, intake gaskets depending on the engine, and the interior carpet near the firewall for leaks

  8. Remove the Pressure Tester

    Twist the connector counterclockwise and unlock it. Pressure releasing means the pressure tester can be removed.

Fix Cooling System Parts Yourself

Fix cooling system parts yourself like the radiator, thermostat, coolant reservoir, water pump, and more with many videos for different makes and models in 1A Auto’s video library.

Shop Cooling Parts and Tools

Related Content

Summary
Radiator Pressure Test | How to Pressure Test Your Car's Cooling System
Article Name
Radiator Pressure Test | How to Pressure Test Your Car's Cooling System
Description
If you want to find a coolant leak or test the pressure of the cooling system after a coolant flush, you can perform a radiator pressure test, also known as a coolant pressure test. These steps explain how to use a coolant pressure tester and perform a coolant pressure test.
Author
Publisher Name
1A Auto
Publisher Logo

Leave a Reply

Your email address will not be published. Required fields are marked *