…..More to come!
Author: Jeremy Nutt
Hi, I'm Jeremy.
Thursday = 1969 Porsche 911 with GT3 Engine
It’s Thursday folks, and since I declared this week as “Project Car Week”, you should know by now what needs to happen. I need to bring you yet ANOTHER awesome project car. Woo! Now, with so many great projects out there to choose from, I am actually having a tough time deciding which ones to share with you. Do I share my own projects? What about a friend’s? I could go with the Karmann Ghia, the turbo truck, the Rabbit, the Nova, the Impala convertible, the ’60 Ventura, the monster-trike, the RX8, the Fiero, the other Fiero, the Trans Am, the Toyota truck….. I could go on and on…… OR …… I could just pick a car off the internet that I like.
Ta-da!
Internet it is! Today’s car is a 1969 Porsche 911. It was built and documented by a guy that goes by the name of “petevb” on pelicanparts.com. He started with a run of the mill Porsche and ever so gently turned it into a dream car of mine. The car was intended to be raced, so the first step was to add a roll cage to stiffen the chassis and protect the driver from danger. The average guy would have thrown a bunch of pipe inside and created a jungle gym, not Petevb though. He actually designed the cage, and stress tested it with the wonderous world of modern technology. Once he was happy with the test results, the cage was built and he began to make everybody else look like noobs. Tons of chassis bracing, stretching, shortening, cleaning, and repairing happened, and it was engine time.
The engine is water cooled, and was intended for a high performance GT3, but we all know by this point in the story that it landed inside this amazing 911. It’s backed up (Can I even say that with a Porsche?) with a modified 993 transmission. It makes 380 horsepower which sounds like a pretty fair number, but then I throw this little fact at you causing your jaw to drop. This car only weighs 2150 lbs. WUT! Ah yes, I remember now….. Petevb also used carbon fiber body panels for weight savings (ok, everybody calm down). Be sure to check the pictures for maximum shock factor, because the car is brilliant from every angle. The quality of work throughout the whole car is top notch, and the car as a whole is amazing because of it. With that, I present to you pictures and video for your enjoyment.
Turn Your Volume Up.
Entire build can be found here:
Wednesday = Hand Made Toyota 2000GT
If you were to tell me that you have never heard of Shin Yoshikawa, I wouldn’t be shocked, because I hadn’t either up until recently. Who is he? you ask. Well, the short story is that he is an absolutely incredible metal fabricator. He and his shop (Studio Time Capsule) create automotive art in the form of classic sports cars. They restore automotive history, and recreate some of the more special cars in their own interesting way. They are true craftsmen in my mind, and use all of the old school tools that the coach builders of the 1920’s and 1930’s used. Much of their work is with aluminum, which is generally known to be painful to work with. It is tough to weld, and even tougher to shape. Shin and his crew don’t seem to be phased by it though, because they build entire cars out of it. But how? Well, I don’t know…. When I figure it out I will let you know.
This specific project is a hand built recreation of a Toyota 2000GT (Only ~350 real ones were built from 1967-70). Shin decided to make his own all aluminum body from scratch that was identical in shape to an original body. The amount of work and skill involved in doing this is nearly unmeasurable. I hope you enjoy today’s project as much as I do, because it is a very rare art.
Found on:
Tuesday = 1929 Whippet Turbo SRT-4
Today’s project car was spotted on killbillet.com and is truly a bizarre combination of old rusty sheetmetal, and modern engine technology. The user who goes by the name of “kberjian” acquired a destroyed Dodge Neon SRT-4 chassis and drivetrain, and knew that it belonged in the back of a 1929 Whippet that was sitting around the family farm. He dragged them both into a garage and began creating a rear engine, tilt body, ’29 Whippet. When done, it will likely do wheelies and be quite horrifying exciting to drive. If it were up to me, I would have used a Jeep transmission behind the SRT-4 engine and kept it front engine, but you know what, it’s not my build… Obviously, it is still an unfinished project, but I will be keeping my eye on it for updates. I’m quite anxious to see this car move under it’s own power.
Found on:
http://www.killbillet.com/showthread.php?t=23494
(login might be required)
Monday = AWD Mitsubishi Turbo Dune Buggy
It’s no secret that I love cars with forced induction & all wheel drive. There is also a wacky rumor floating around that I may have a secret obsession with air cooled VW’s. Well, when you mix that dream with reality, you find yourself on the internet staring into the bug eyes of an incredibly scary Eagle Talon Dune Buggy. It is the brainchild of a guy appropriately named “dsmbuggy” on baystatedsm.com.
He took a drivable, but rough looking AWD Talon, cut the body off and ever so gently applied a dune-buggy body to it. He then added a few roll bars to complete the package and reserve his spot in dune buggy legends. Is it going to horrify nearby children & pets? You bet it is. Will it ever be able to pass a state inspection? “Who’s Asking?” …. Read More
August 9 -13th = Project Car Week!
This week, I have decided to focus the 1A Auto blog solely on cool project cars. Old cars, new cars, and cars so ferocious that you will be left shivering in your PJ’s. I’m not saying any of the cars this week will ever be safe, cheap, reliable, or even good ideas. Will they change your life? Nope. Will you share this blog with your friends? Of Course you will, because it’s awesome!! Might you shed just 1 tear over the course of the week? Quite possibly.
And so we begin…..
eBay Now Has “My Vehicles”
Ebay just recently came out with a new feature that is still quite beta, but looks pretty good. It is called “My Vehicles”, and I feel like it is a big step in the right direction. It allows users to save specific vehicles to their user name, which is great for people like myself that search for parts for the same car every time.
Since it is a beta version, eBay is trying to get users to test it out for them. If you fill out a survey, you are entered into a contest where you have a chance to win a free trip to the SEMA show, and then dropped off in the “my vehicles” area. Good stuff! You can enter the contest a bunch of times, which of course I did because I like free stuff as much as anybody. Here is the link to get you there.
If you are feeling super lazy or if you are way too cool to enter a contest, you can go straight to the “my vehicles” area by clicking the next link below. 😉
http://garage.motors.ebay.com/myvehicles
Check it out and let me know what you think.
I personally think it would be pretty rad if a user could save a picture of their own car up there, and maybe have saved searches as well. I’m sure cooler stuff is on the way. 1 step at a time!